Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester
Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester

Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester

Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester is mounted in a position with the edge vertical. The blade
contact us Quick Inquiry
Product Details
Technical Parameters

 Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester

 

 

METHODOLOGY

Blade Knives Sharpness Edged Tester Blade Sharp Edged Tester is mounted in a position with the edge vertical. The blade is moved back and forth whilst a pack of special testing paper is lowered onto the blade. The blade cuts through the paper and the sharpness is then measured.


SPECIFICATIONS

1. Applicable Standards: EN ISO 8442-5

2. Test stoke: 20 to 60 mm (adjustable)
3. Load between the test media and the test blade: 50N
4. Cutting speed: 50 mm/second over 90% of the specified stroke
5. Max blade width: 110 mm (include 50 mm of cut)
6. Controller: PLC Programmable controller, LCD Touch screen interface
7. Result Output: USB Flash Drive – Print Out the Image File Tabular or graphical presentation of result
8. Connection: USB interface (Optional)
9. Compressed air requirement: 3 L/min at 6 bar
10. Power: 1 phase, AC 220V, 50~60Hz(Customized)


ADVANTAGES
 
1. Ball screw with servo motor to ensure high accuracy of movement
2. Linear optical scale, Laser displacement detector
3. PLC programmable controller, LCD touch screen interface, easy to operate
4. Automatic add paper during test
5. With USB interface to output test results
6. Display test results and graph
7. Two test items: Initial Cutting Performance (ICP) and Total Card Cut (TCC)



 



TWO MEASUREMENTS ARE PRODUCED

1. Initial Cutting Performance (ICP) This measurement is based on the first 3 strokes, which represents the cutting ability or the sharpness of the blade.
2. Total Card Cut (TCC) This is measured by conducting over 60 strokes, which represents the life of the blade. These two measurements are produced and recorded by a microcomputer for each of the knives tested.

 

 

Product Parameters
 

cutting stroke

40 mm plus the width of 10mm test medium.

speed

50 mm per second.(adjustable)

control method

PLC control

load weight applied to the blade

50N, which is composed of sliders, fixtures, paper CARDS and weights and all other related accessories.

clamp strength

130 + 2.5N

stack height of strip

no more than 50mm

the cutting position of the blade starts from the edge of the paper clip

3mm + / -0.2mm

weekly test of "A" blade

60

weekly test of "B" blade

200

products

Products Recommended