Product Center

Hydraulic Universal Test Machine




15 days after order.








Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.


L/C, D/P, T/T



Hydraulic Universal Test Machine STRUCTURE

Large diameter columns and rugged components for durable frame:Dual power mechanism servo motor gear pump.Dual motors. Dual oil pumps, gear oil pump for boosting. The separate oil supply of the clamp and the oil cylinder is stable and reliable. (The traditional three-phase asynchronous motor supplies oil for the clamp, and the servo motor supplies oil for the oil cylinder. It is ultra-quiet and the noise is less than 70 decibels. The loading is more stable and faster. The sample clamping is more reliable and durable.)
Independent external controller: The addition of an independent external manual control unit provides a new solution for the measurement, control and operation of the testing machine. USB data transmission fully supports notebook computers, tablet computers, and desktop computers; it is an important part of leading the development of testing machine technology.
Multifunctional handheld controller: It can control the rise and fall of the moving beam and the oil cylinder, the clamping and unclamping of the jaws, and the emergency stop function of the oil pump, which is more convenient to use the sample clamping.
Operation monitoring system: It has the function of phase sequence, phase loss self-check indication, electrical overcurrent, overload and other protection functions, so that the equipment operation is safe and reliable.
Elastic damping mechanism: The lower part of the lead screw is equipped with an elastic damping mechanism Effectively reducing the impact caused by the fracture of the sample and reducing the noise.
Flexible dust cover: Prevent foreign objects from entering, to increase the durability of the lead screw and transmission mechanism, and to improve the aesthetics of the whole machine.
Safety shield: Three-sided cold-rolled steel plate punching safety shield to prevent foreign objects from flying out during the test. It improves the protection level and facilitates real-time observation by operators, effectively ensuring the personal safety of the experimenter.
Cartridge valve type differential pressure follow-up technology: The servo pump station adopts the cartridge valve type differential pressure follow-up technology. It is energy-saving, environmentally friendly, safe and reliable, and reduces the heating of the system; at the same time, the clamping force increases with the increase of the test force, and the sample is firmly clamped.


Description Parameters
Model HD-B616
Max. load 300KN 600KN 1000KN
Load range 6KN-300KN 12KN-600KN 20KN-1000KN
Load accuracy ±1%
Elongation resolution 0.01mm
Piston stroke 250mm
Max. piston stroke speed 50mm/min
Elongation accuracy ±1%
Max. Tensile space 300mm(excluding piston stroke)
Max. Compression space 250mm(excluding piston stroke)
Display mode PC
Clamping mode Hydraulic
Operation mode Manual
Flat sample thickness 0-15 mm
Clamping width 70mm 70mm 125mm
Round sample diameter Φ10-φ32 mm Φ13-φ40 mm Φ13-φ60 mm
Compression plate size 170*170mm 170*170mm 204*204mm
Load frame dimensions 900*750*2200mm
Oil source dimensions 1200 x 550 x 1100mm




1. Tested sample: wood, steel sheet, steel rod, wire, screw and other metal materials.
2. Different test with different grips: tensile, bend, compression, shear test.
3. Software can issue report with results for max. force, elongation, tensile strength, compression strength, bend strength, etc.
Steel bar tensile testing machine can perform tensile, compression, bending, shearing, tearing, peeling and other tests on steel materials, calculate the maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc.

Applicable Testing Standards

ISO 6892-1 & 2 Metal Tensile Testing
ISO 14323 Weld Cross Tension Test Equipment
ASTM A131 Tensile Steel for Ships Test Equipment
ASTM A370 Tensile Bend Strength Steel Test Equipment
ASTM A517 Tensile Strength Steel Plate Test Machines
ASTM A1034 Steel Reinforcing Bars Rebar Test Machine
ASTM A1061 Wire Steel Strand Test Equipment
ASTM E8 Tension Testing of Metallic Materials

Procedure of tensile testing of steel

The sample was grasped at both ends with fixtures and the fixtures pulled slowly on the sample longitudinally until it broke. Tensile force is called load and the load is made according to the length change or displacement of the material. The load is converted to a stress value and the displacement is converted to a strain value.


Data Acquisition: provides data acquisition and management for compression, tensile, and splitting tensile tests throughout the test execution. Test parameters can be set and details about the test carried out such as client details, test type, specimen type, and user info…Real-Time Display The Test Data
Accommodate Various Testing Needs: software has a variety of pre-set programmed test cycles for compression, tensile and cyclical testing to meet a variety of testing standards.
Remote Control: via software, test execution, and data analysis available through RS-232 port
Test Data Reports & Prints: test report printing options include direct-to-printer or excel file or graph export.


Standards for Reference
Tensile tests at ambient temperature Compression tests at ambient temperature Shear Tests Strand tensile tests
ASTM E8M–09 AS 1391 ISO 15630-2 ASTM C39 EN12390-3 ASTM E 143 ASTM A 416
ASTM A370-07b ASTM A 706/A, 706M – 6a ASTMC469 DIN1048 ASTM 496
ASTM A185, A185M-07 ASTM A48M-03 EN 10002-1 ISO 4506 UNI6556 BS 5896
ASTM A615, A615M-09 HB 5143 EN 10080 ISO6784
ASTM A82, A82M – 07 ISO 15630-1 JIS Z 2241
Metals and Construction Material
Bend Tests
ASTM A185/A185M – 07 API 5L ISO 7438
ASTM E190 AWS B4.0
Welded Fabric
Shear Tests
ASTM E8M – 09 ASTM A82/ A82M ISO 15630-2 HB 5143
ASTM A370-07b ASTM A 706/A ISO 6394 JIS Z 2241
ASTM A185/ A185M AS 1391 706M – 06a BS 18
ASTM A615/A615M-09 ASTM A48M-03 EN 10002-1
ASTM A82/ A82M – 07 ISO 15630-1 EN 10080– 07
Tensile tests for bolt Nut load keeping tests
ASTM F606-07 ISO 898-1 ASTM E290 – 09 ISO 7438 ISO 15630-2 JIS Z 2248
AS 4291.1 ASTM A370-07b ISO 15630-1 ISO 10065
Cement, Concrete and Rock
Flexural tests for cement Compression tests for cement Flexural tests for concrete
ASTM C348 ASTM C349 -08 ASTM C 78 – 07
ASTM C1609 /, C1609M ASTM C109, C109M – 08 ISO 1920-4
ISO 679 ISO 679
BS EN 196-1 BS EN 196-1

Related Products


Please fill out the form below to request a quote or to request more information about us. Please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. We’re ready to start working on your new project, contact us now to get started.