Drop Weight Impact Testing Machine/Drop Tester
15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T
Drop Weight Impact Testing Machine During the products handling or transport process, there may be drop/ fall, which results in damage within the products. And the machine simulates the drop/ fall of a finished product to evaluate the damage. Standard test of packaged freights (surfaces,corners, and edges), etc. can be performed efficiently with a high accuracy.
|Drop height||400-1500mm (can be customized)|
|Display method||Digital display|
|Max. weight of sample||60kg (can be customized)|
|Max. size of sample||(L*W*H) 800*800*800mm|
|Drop panel area||150*180*8mm (material is Solid steel plate)|
|Control box dimension||(L*W*H) 350*350*1100mm|
|Deviation of drop horizon||Less than 1°|
1. Outside material: advanced paint coat.
2. It adopts double wings to fix the products well when testing.
3. Power system: drive device (imported motor + speed reducer +Axel+ upper and lower limitation + spring+electromagnet)+dropping device(dropping standard board +magnet + safety spacing push rod + automatic return back + digital alto-meter +encoder +hydraulic pressure buffering device)
4. Control system: adopting electromagnet sensor control, the interface is easy to operate, high degree automatic control.
5. Safety device: upper and lower limitation device, automatic off-power device if electricity leakage occurs.