Chair Universal comprehensive test machine
15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T
Chair Universal comprehensive test machine simply utilize a ball screw linear actuator to apply loads and position with a high level of accuracy. The actuator is mounted to a unique system of linear bearings which allow vertical, horizontal, and diagonal motion.
BIFMA X 5.1-2011 Tests this machine can perform:
5,6 – Back Strength Tests
10 – Tilt Mechanism
12- Stability Test (Rear & front stability)
13- Arm Strength – Vertical
14 -Arm Strength – Horizontal
15,16 -Backrest Durability Test –Cyclic
23-Table Arm Static Load
24- Table Arm Load Ease
1. Tester bears one servo actuator and with stroke 600 mm.
2. The actuator is easy adjust to perform Vertical and horizontal static test.
3. Transcell load cell (maximum capacity 200kg).
4. One servo motor control pulley & belt system.
5. All accessories needed for the above mentioned test include the weight and fixtures.
6. Programmable logic controller, touch screen interface.
7. All load, cycle rate, speed can be made from the controller.
8. With USB port to output test results.
9. The machine with four base to fix when do the test, but it also with wheel can move around.
10. Safety protection device when operate long test.
11. Power: one phase, AC 220V, 50Hz.
|Capacity||200kg ( Transcell senor)|
|Controller and Interface||Programmable logic controller, touch screen interface|
|Accessories||Chair Armrest Fixture x 2|
|Chair Pull Fixture x 2|
|Seat loading pad x 1|
|Smaller seat loading pad x2|
|Back loading pad x 1|
|Dead Weight (102 Kg) x 1|
|Air Pressure||7 Bar|
BIFMA X5.1 2017