Product Center

300KN Hydraulic Universal Testing Machine




15 days after order.








Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.


L/C, D/P, T/T




Hydraulic Universal Testing Machine with underneath type oil cylinder and four columns structure is mainly used to do tension, compression, bending, shearing test for metal materials, non-metal material. It is applied for fields of metallurgy, construction, light industry, aviation, aerospace, materials, universities, scientific research units, etc.

This universal test machine uses the motor to drive screw to move fixtures. Fix sample between upper and lower fixture and pull sample by the upper fixture upward with specified speed. The load cell connecting with upper fixture will sense the force and then convert it into voltage sign to the display screen. Force value will be displayed automatically on the screen.


Deformation under defined load: Test deformation under defined load of tested sample
Load under defined deformation: Test load under defined deformation of tested sample
Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.
This Hydraulic Universal Testing Machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.

Design Standard(inculding but not limited to…)

Tensile Test: ASTM D882 ASTM D 638 / ISO 527-1/2
Bend Test ISO-178 / ASTM D 790
Tear Test:ASTM D 624
Peel Test : ASTM D 3330
Compression Test : ASTM D 659


Item Description
Max. load 300KN
Load range 6KN-300KN
Load accuracy ±1%
Elongation resolution 0.01mm
Piston stroke 250mm
Max. piston stroke speed 50mm/min
Elongation accuracy ±1%
Max. Tensile space 300mm(excluding piston stroke)
Max. Compression space 250mm(excluding piston stroke)
Display mode PC
Clamping mode Hydraulic
Operation mode Manual
Flat sample thickness 0-15 mm
Clamping width 70mm
Round sample diameter Φ10-φ32 mm
Compression plate size 170*170mm
Load frame dimensions 900*750*2200mm
Oil source dimensions 1200 x 550 x 1100mm


The TM2101 software is designed purposely for computer controlled electronic universal testing machine, used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.


Related Products


Please fill out the form below to request a quote or to request more information about us. Please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. We’re ready to start working on your new project, contact us now to get started.