Cutlery Corrosion Resistance Tester
Cutlery Corrosion Resistance Tester

Cutlery Corrosion Resistance Tester


The machine is used to test the resistance corrosion strength of cutlery. The Cutlery Corrosion Resist


Product Details
Technical Parameters

Cutlery Corrosion Resistance Tester


APPLICATIONS& TEST PURPOSE

The machine is used to test the resistance corrosion strength of cutlery. The test specimens are intermittently immersed in a 1 % solution of sodium chloride (NaCl) at 60 ℃for 6 h. The number and size of any pits that have formed are measured visually with the aid of a microscope lens.

 

TEST STANDARD: ISO8442-1, ISO8442-2

 

STANDARD FEATURES

1.  Water temperature maintain at 60± 2℃.

2.  24 hours Timer to set and control the test period

3.  Cycle speed controllable from 25 cycles per minute.

4.  Tank body made of PVC.

5.  Ceramic heater was used for heat source.

6.  Pneumatic cylinder was used to lift up and down the fixture rack.

7.  PLC programmable controller, LCD touch screen interface

8.  Power: 1 phase, AC 220V, 5060Hz

9.  Machine Size: 1350mm*1050mm*2550mm

10. Gross Weight: 210KG


Product Parameters




1.  Water temperature maintain at 60± 2℃.

2.  24 hours Timer to set and control the test period

3.  Cycle speed controllable from 25 cycles per minute.

4.  Tank body made of PVC.

5.  Ceramic heater was used for heat source.

6.  Pneumatic cylinder was used to lift up and down the fixture rack.

7.  PLC programmable controller, LCD touch screen interface

8.  Power: 1 phase, AC 220V, 5060Hz

9.  Machine Size: 1350mm*1050mm*2550mm

10. Gross Weight: 210KG