Sponge/foam is widely used in various industries, and the detection of sponges involves some international foam test standard.
1.Hardness/indentation ratio standard
Hardness: ISO 2439 Method B (40% IFD), ISO 3386-1
(ASTM D3574-B, DIN 53576, JIS K6400-6).
Indentation ratio: The indentation ratio is the ratio of the two hardnesses (ISO 2439 or ISO 3386-1): 65% IFD to 25% IFD.
The hardness of the sponge is determined by a hardness test, and the value of the indentation ratio determines the cushioning quality of the sponge. A higher indentation ratio indicates a higher buffer quality.
Test Machine:Foam Compression Test Machine
2. Rebound rate standard
ISO 8307 (ASTM D3574-D, DIN 4651, JIS K6400-9B)
Test Purpose: This test result is a factor reflecting the comfort of the sponge.
Test method: a steel ball is dropped onto a sponge sample, and then the rebound height is visually observed.
Test Machine:Foam Rebound Test Machine
3. Fatigue testing standard
ISO3385:1995 (ASTM D3574-I1, DIN 53574, JIS K64-8B)
Test Purpose: This test result is a factor reflecting the durability of the sponge.
Test method: After the sponge sample was subjected to 80 000 mechanical indentation tests, the hardness and thickness were measured.
Test Machine:Foam fatigue Test Machine
4. Permanent deformation standard
ISO 1856 Method A (ASTM D3574-D, JIS K6400-7)
Testing purposes: The purpose of the test is to test the compression resilience of the sponge.
Test method: refers to the thickness change of the static pressure sponge sample after storage at 70 ° C for 22 hours.
Test Machine:Air Permanent Test Machine
5. Tensile strength / elongation standard
ISO 1798 (ASTM D3574-E, DIN 53571, JIS K6400-10)
Test Purpose: Used to test the tensile elasticity of the sponge to prevent the filling of the performance of the sponge.
6. Ash content standard
EN ISO 1171
Test Purpose: This requirement prevents the use of fillers that detract from the performance of the sponge at the same density.
Haida offers a complete product line of mechanical testing to compress, stretch and breathe test on foams, This series foam test equipment including :Foam compression test equipment,foam fatigue test equipment,foam rebound test equipment,foam permanent deformation test equipment,etc.